Presents
SyneRAID™-800SA
SCSI/Fibre-to-SATA RAID Subsystem
Previous
Presents
SyneRAID™-800SA
SCSI/Fibre-to-SATA RAID Subsystem
Previous
Model |
SyneRAID-800SA Tower << Special Order >> These units need to be ordered two weeks in advance for on time delivery |
SyneRAID-8SCSA |
U4WSCSI/320MBs-to-SATA (Dual Channel Clustering): 15" Tower RAID subsystem with Intel IOP80321 64bit/400Mhz processor, 64MB cache memory, 8xhot-swappable drive caddies, 2x300W load-sharing redundant power supplies comes with: One RS232 null modem cable, one 3ft SCSI cables, one LVD/SE terminator and user manual. (Optional GUI RAID Management Software). |
| SyneRAID-8FCSA (Fibre Copper) (HSSDC2-to-SATA) |
FC/200MBs-to-SATA (SAN Ready): 15" Tower RAID subsystem with Intel IOP80321 64bit/400Mhz processor, dual loop Copper HSSDC2 fibre channel with 2Gbit/sec per loop, 64MB cache, supports 8xhot-swappable drive caddies, 2x300W load-sharing redundant power supplies comes with: One RS232 cable and user manual. (Optional GUI RAID Management Software). Fiber Cables Sold Separately |
| SyneRAID-8FOSA (Fibre Optical) (Optical LC-to-SATA) |
FC/200MBs-to-SATA (SAN Ready): 15" Tower RAID subsystem with Intel IOP80321 64bit/400Mhz processor, dual loop Optical LC fibre channel with 2Gbit/sec per loop, 64MB cache, supports 8xhot-swappable drive caddies, 2x300W load-sharing redundant power supplies comes with: One RS232 cable and user manual. (Optional GUI RAID Management Software). Fiber Cables Sold Separately |
| Model | Recommended SCSI & Fibre Adapter |
| 64bit-PCI U4WSCSI/LVD/320MBs Single Channel Bus Mastering SCSI Adapter w/LSI Symbios 53C1030 High Performance Chipset. Compatible with WinNT4, Win2000, Win2003, WinXP, SCO UNIX, UnixWare, LINUX, Sun Solaris x86, Netware 5.1, 6.0 and others. | |
| ** Copper ** SyneFCA-2GHC **
Optical ** |
64bit PCI 2GB Fibre Channel Low Profile, Copper Type ports with Copper HSSDC, HSSDC2, DB9 or Optical LC Connector. Built-in Qlogic ISP2310 RISC Processor, 400Mbytes/sec Fibre Channel Transfer Rate in full Duplex Mode, FC-AL Private & Public Loop, Point-to-Point, Switched Fabric, FL-Port, F-Port for Fabric Log-in. Concurrent SCSI, IP, Virtual Interface (VI) Protocol and FC Tape Support, Class 2 and 3 Fibre Channel Service, BIOS Support (Local & Fabric). Comes with SANblade GUI Software. |
Performance:
 | 2GB F/C or U4WSCSI/320MBs architecture provides leading-edge data storage speeds |
| Up to 1GB ECC Cache with Tuning options to match your data trends |
| Module and Cable-less design enhance system reliability and stability. |
Availability:
| Redundant, hot-swappable Intelligent cooling fans ensure system temperature stability |
| 1+1 Redundant, hot-swappable, Load-Sharing power supplies reduce power spikes and surges |
| Supports Multiple and Global hot spares for complete data protection |
| Backplane designed for increased reliability and hot-swappability |
| Intelligent dynamically cooling system for high RPM drives |
| Proprietary chassis design for enclosure management & status report of all components |
Scalability:
| Host independent controller-based LUN mapping for multiple server environments |
| Supports multiple ID, multiple LUN & multiple RAID |
| Supports a wide variety of SATA disk drive capacities |
| Scale to Terabyte solutions simply on a single RAID controller |
| Dynamic on-line RAID expansion for instant storage growth without any system downtime |
Specifications |
|
| Form Factor : | Desktop tower Type |
| Host Interface : | Dual U4WSCSI/320MBs channels or Dual loop 2Gb/200MBs Fibre channels |
| System Architecture : | OS independent and host transparent, Intel IOP80321 64bit/400Mhz processor, cache memory up to 1GB ECC |
| RAID Level | 0,1, (0+1), 3,5, multiple RAID, JBOD |
| Backplane Design : | Supported 8-bay SATA hot-swap disk drives |
| Hot-Swap Components : | Hard drives, power supplies, cooling fans |
| Redundant Components : | Hard drives, power supplies, cooling fans |
| Enclosure Management & Error Notification : | Temperature failure, fan failure, power failure monitor and report. Audible alarm, status LEDs, SNMP traps, network messaging, remote paging |
Model |
SyneRAID™-800SA-S | SyneRAID™-800SA-F |
| Number of drives: | 8 |
8 |
| Host Type: | Dual U4WSCSI/320MBs |
Dual loop 2Gb/200MBs Fibre |
| Drive Type: | Low-profile (1-inch high) SATA disk drive |
|
| Drive Capacity: | 20GB, 40GB, 60GB, 80GB, 100GB, 120GB, 160GB,200GB, 250GB, or 300GB (5,400 and 7,200 RPM) |
|
| Maximum Cap/Enclosure: | >2.4TB (8 x 300GB) |
|
Power Requirements |
||
| Input Voltage: | 100~240 VAC 46~63Hz |
|
| Power Supply Rating: | 2 x 300 watt hot-swappable PSUs |
|
Certification Compliance |
||
| Emission Requirements: | FCC Class A |
|
| Safety Requirements: | UL1950, CSA #950, TUV/EN60950 |
|
| CE Compliance (EMC): | 89/336/EEC EMC Directive |
|
Physical Characteristics Tower |
||
| Width: | 7.7" (195 mm) |
|
| Length: | 12.36" (314mm) |
|
| Height: | 15.35" (390 mm) |
|
| Weight: | 24.2 lbs.(11Kg) w/o drives |
|
Environment |
||
| Ambient Temperature: | Operating: 5°C to 35°C Non-operating/Storage: - 40°C to 70°C |
|
| Relative humidity: | 95% @ 30oC (non-condensing) |
|
| Storage Management : Java-based GUI RAID management software (Option) | ||