Presents
SyneRAID™-1600SAA 3U 19" Rack
SCSI/Fiber-to-SATA RAID Subsystem
(Advanced Version)
Presents
SyneRAID™-1600SAA 3U 19" Rack
SCSI/Fiber-to-SATA RAID Subsystem
(Advanced Version)
Unprecedented
Performance, Reliability, Cost,
up to 8TB of Capacity in a Single Array
Model |
SyneRAID-1600SAA
3U Rack (Advanced Version) ** Drives Not Included ** |
CD$ |
US$ |
SyneRAID-16SSAA |
U4WSCSI/320MBs-to-SATA (Dual Channel Clustering): 3U 19"
Rackmount RAID subsystem with Intel IOP80321 64bit RISC processor, 128MB cache memory, 16
x hot-swappable drive caddies, 3x300W (600+1) load-sharing redundant power supplies. Options: |
$7,362 |
$6135 |
SyneRAID-16FCSAA |
FC/200MBs-to-SATA (SAN Ready): 3U 19" Rackmount RAID subsystem
with Intel IOP80321 64bit RISC processor, dual loop Copper
HSSDC2 Fibre Channel with 2Gbit/sec per loop, 128MB cache memory, 16 x
hot-swappable drive caddies, 3x300W (600+1) load-sharing redundant power supplies. Options: |
$8,477 |
$7,064 |
SyneRAID-16FOSAA |
FC/200MBs-to-SATA (SAN Ready): 3U 19" Rackmount RAID subsystem
with Intel IOP80321 64bit RISC processor, dual loop Optical
LC Fibre Channel with 2Gbit/sec per loop, 128MB cache memory, 16 x hot-swappable
drive caddies, 3x300W (600+1) load-sharing redundant power supplies. Options: |
$8,587 |
$7,156 |
SLD-RAL-1600-3URAK |
Expandable Proprietory Sliding Rail for SyneRAID-1600 3U Rack | $1 02 |
$85 |
Model |
Recommended SCSI & Fibre Adapter | CD$ | US$ |
| 64bit-PCI
U4WSCSI/LVD/320MBs Single Channel Bus Mastering SCSI Adapter w/LSI Symbios 53C1030
High Performance Chipset. Compatible with NT4, Win2000 & 2003, XP, SCO UNIX, Netware
5.1, 6.0, UnixWare, LINUX (RedHat, SuSe, Caldera, etc..). Fully tested for Solaris x86 and Solaris SPARC |
$206 | $172 | |
| ** Copper ** SyneFCA-2GHC ** Optical
** |
64bit PCI 2GB Fibre Channel Low Profile, Copper type ports with HSSDC,
HSSDC2, DB9 or Optical LC Connector. Built-in Qlogic ISP2310 RISC Processor,
400Mbytes/sec Fibre Channel Transfer Rate in full Duplex Mode, FC-AL Private & Public
Loop, Point-to-Point, Switched Fabric, FL-Port, F-Port for Fabric Log-in. Concurrent SCSI,
IP, Virtual Interface (VI) Protocol and FC Tape Support, Class 2 and 3 Fibre Channel
Service, BIOS Support (Local & Fabric). Comes with SANblade GUI Software. Fully tested for Solaris x86 and Solaris SPARC |
$629 $916 |
$524 $745 |
| **
Purchases done by Visa/MC are Charged in Canadian Dollar ** ** Prices are Subject to Change without Notice ** |
|||
Performance:
 | High-Performance Intel IOP80321 64-bit RISC microprocessor |
| 2GB/200MBs Fibre Channel or U3WSCSI/160MBs & U4WSCSI/320MBs architecture provides leading-edge data storage speeds |
| Up to 1GB cache with Tuning Options to match your data trends |
| Module and Cable-less design enhance system reliability and stability. |
Availability:
| Redundant, hot-swappable Intelligent cooling fans ensure system temperature stability |
| 2+1 Redundant, hot-swappable, Load-Sharing power supplies reduce power spikes and surges |
| Supports Multiple and Global hot spares for complete data protection |
| Backplane designed for increased reliability and hot-swappability |
| Intelligent dynamically cooling system for high RPM drives |
| Proprietary chassis design for enclosure management & status report of all components |
Scalability:
| Host independent controller-based LUN mapping for multiple server environments |
| Supports multiple ID, multiple LUN & multiple RAID |
| Supports a wide variety of SATA disk drive capacities |
| Scale to Terabyte solutions simply on a single RAID controller |
| Dynamic on-line RAID expansion for instant storage growth without any system downtime |
Previous
<< Specifications >> |
||
| Form Factor : | 19" Rackmount 3U Chassis |
|
| Host Interface: | Dual U3/U4WSCSI/160MBs/320MBs channels or Dual loop 2Gb/200MBs Fibre channels | |
| System Architecture: | OS independent and host transparent, Intel IOP80321 64-bit RISC microprocessor, cache memory up to 1GB ECC | |
| RAID Level | 0,1, (0+1), 3, 5, 30 and 50, multiple RAID ,JBOD | |
| Backplane Design : | Supported 16-bay SATA hot-swap disk drives | |
| Hot-Swap Components : | Hard drives, power supplies, cooling fans | |
| Redundant Components : | Hard drives, power supplies, cooling fans | |
| Enclosure Management & Error Notification: | Temperature failure, fan failure, power failure monitor and report. Audible alarm, status LEDs, remote paging | |
| Battery Backup Module: | Yes (Option) | |
| Model: | SyneRAID™-1600 SCSI | SyneRAID™-1600 Fibre |
| Number of drive bays: | 16 | 16 |
| Host Type: | Dual U3/U4SCSI/160MBs/320MBs channels |
Dual Loop 2Gb/200MBs Fibre channels |
| Drive Type: | Low-profile (1-inch high) SATA disk drive | |
| Drive Capacity: | 20GB, 40GB, 60GB, 80GB, 100GB, 120GB,
160GB,200GB, or 250GB (5,400 and 7,200 RPM) |
|
| Maximum Cap/Enclosure: | >4.8 TB (16 x 300GB) | >4.8TB (16 x 300GB) |
<< Power Requirements >> |
||
| Input Voltage: | 100 ~ 240 VAC 46 ~ 63Hz | |
| Power Supply Rating: | N+1: 3 x 300 watt hot-swappable PSUs | |
<< Certification Compliance >> |
||
| Emission Requirements: | FCC Class A | |
| Safety Requirements: | UL1950, CSA #950, TUV/EN60950 | |
| CE Compliance (EMC): | 89/336/EEC EMC Directive | |
<< Physical Characteristics- Rackmount >> |
||
| Width: | 17.5" (445 mm) | |
| Length: | 22.87" (581 mm) | |
| Height: | 5.12" (131 mm) (3U) | |
| Weight: | 55.2 lbs.(25Kg) w/o drives | |
<< Environment >> |
||
| Ambient Temperature: | Operating: 5°C to 40°C Non-operating/Storage: - 40°C to 70°C |
|
| Relative humidity: | 95% @ 30oC (non-condensing) | |
| Storage Management : Java-based GUI RAID management software (Option) | ||
Previous
