SyneServer 2U IDE/SATA/SCSI RAID Server for P4 or Xeon

Components & Specifications

1)- Chassis & PUS: 460W single or hot-swappable redundant Click to see details & pictures

2)- Main board: Based on advanced Intel chipset with high I/O rating for single P4-PGA 478 or dual Xeon, 533/800FSB for up to 3.6GHZ

3)- Processor/s: Single P44-2.8Ghz or dual Xeon 2.8Ghz w/512K or 1MB L2-Cache, 533/800 FSB. Upgrade up to 3.6GHZ

4)- Memory: 512MB ECC DDR-266/400 PC-2100/3200. Upgrade up to 8GB for P4 and 24GB for dual Xeon

5)- Hard Drives: Both units include 4x hot-swappable drive slots for RAID 0, 1, 0+1, 3, 5 & JBOD (IDE/SATA/SCSI optional)

6)- Network: Includes; 2 x Intel Gigabit Ethernet controller

7)- VGA: Includes; ATI RageXL 8MB PCI graphic controller

8)- CD & Floppy: Includes; 52x CD-ROM and 1.44 floppy kit (CD-RWR & DVD Optional)

9)- RAID with Management Software: 100% hardware IDE/SATA/SCSI RAID controller hot-swappable with 4x disks (IDE/SATA/SCSI optional)

Four Channel SATA-II/NCQ 3Gb 64-bit PCI-X RAID Controller with Silicon Image Chipset

	Provides 4 Serial ATA II Channels
	Supports RAID 0 (striping), 1 (mirroring) and 0+1
	133MHz PCI-X Data Transfer Rate up to 1.064GB/S
	Supports SATA-II Rate up to 3.0Gb/s
	Optional bracket for Low Profile PCI form factor
	Supports Serial ATA II Port Multiplier Specifications
	Supports Serial ATA II Native Queuing
	Co-exist with on-board IDE devices due to independent BUS-Mastering
	ROM BIOS supports RAID setup and Boot Features with INT13
	Supports up to Hard Drives over 137GB
	Bundles GUI RAID utilities for rebuilding array

10)- Add-On Cards: Minimum 3xPCI slots 32bit 5V & 64bit 3.3V for add-on adapters SCSI, Fibre, etc. (Additional PCI slots possible and optional)

11)- Monitoring: Remote Management via IPMI Intelligent Platform Management Interface: (optional)

	IPMI 1.5 Compliant (IPMI over LAN, serial port and modem)
	Supports Emergency Management Port (EMP: COM or LAN)
	Dedicated Serial Port
	Shares LAN controller with main board and uses out-of-band bandwidth
	Supports hardware monitor for: CPU & system temperature, system fan, CPU fan status and system voltage
	Supports event log information for: BIOS and hardware monitor events
	Supports remote management when system dead or in power standby
	Remote power control: a. Control through OS: Shutdown, Reboot and Power cycle b. Control directly through buttons on chassis: Reset, Power down, Power up and Power cycle
	Supports pager alert, SNMP trap (multiple destinations)
	Console redirection (text only) through both LAN and Serial Ports
	OS independent
	User and password security control