ARAID2000: SATA RAID1 with Auto-Rebuild, Hot-Swap, OS Independent and More..

Home
About Us Products Service Support Contact Us News Employment

ARAID-2000 SATA RAID0, 1

ARAID-2000: is the internal SATA(Host)-to-SATA(Drive) version with RAID 0, 1.

	Unprecedented fast auto-rebuild >700MB per minute
	No drive capacity limitation > 137GB
	Expand drive size without software

	Remote RAID Management Software over IP
	Hard drive, fan and temperature failure buzzer alarm and notification via email and SNMP trap servers

General Features:

	ARAID is compact and fits in any PC with two free 5.25" half-height bays.
	ARAID requires no additional adapter and connects directly to SATA port.
	ARAID needs no driver for installation and supports PnP.
	ARAID is easy to use: * Front panel LCD-Display shows the operation and system status. * System LED & disk READ/WRITE LED shows RAID unit and disk I/O status..
	ARAID saves daily backup time and it can save all the files into dual independent hard disks. Users don't need to make daily backup routines. Just replace a drive and the duplication starts automatically without any system shut-down.
	ARAID is a standalone HDD duplicator and can work even without connecting to a PC SATA port. It can duplicate source hard disk into the target drive independently by only connecting a 4-pin power cord.

Model	ARAID-2000 SATA-to-SATA
ARAID-2000M/MB/P/PB	ARAID-2000 SATA-to-SATA RAID0/1 w/RAID Management Software + Specialized RS-232 Cable: Metal/Metal Black/ PVC/PVC Black
ARAID-IDE-Tray-M/MB/P/PB	ARAID Spare IDE Tray for 1000: Metal/Metal Black/PVC/PVC Black
ARAID-SATA-Tray-M/MB/P/PB	ARAID Spare SATA Tray for 2000: Metal/Metal Black/PVC/PVC Black
ARAID-FAN-REG	ARAID Fan Regular SUNON/other brand
ARAID-FAN-SIL	ARAID Fan Silent Sanyo
* Important Note* In order to use ARAID2000 SATA reliably with your existing SATA port on your mainboard, you need to make sure that the onboard SATA offers NON-RAID or Single Disk configurations and can act as a simple SATA controller. Please remember RAID0 and JBOD are not the same as Non-RAID and Single Disk. Please check this matter with your motherboard manufacturer BIOS. Alternatively, you can use any NON-RAID PCI adapters or any adapter that can offer Single Disk setting. Please ask our technical staff to assist you to choose the right Non-RAID SATA card for your board.

Additional Features:

	Remote RAID Management Software for Win9x, XP, NT, 2000, Enterprise Server and Linux in some cases. This will allow users to monitor the ARAID activities over IP (Internet) and receive emails in case of drive failure.
	No limited drive capacity and supports drives larger than 137GB.
	Single Bright Drive Activity LED for Each Drive
	Front Buzzer Button
	Fully Compliant with and SATA/150
	Fast Auto-Rebuild

	Buzzer and Email notifications for HD, Fan and Temperature failure
	SNMP Trap functions for MS Windows for LAN & WAN

*Specification*
PC Interface:	Internal SATA
HDD Interface:	ARAID-2000 : SATA/150
Host Interface:	ARAID-2000 : SATA
RAID Level	RAID Level 1
Standard HD Format	Yes, fully identical format. Can be used as on-line HDD copier. Accepts drives larger than 137GB capacity.
Requires No Driver	Yes
Requires No Add-on Card	Yes
Failed HD Hot-Swap & New HD Auto-Rebuild	Yes, allows user to replace hard disk while PC is operating

LCD screen	Yes, indicates system and hard disk status
LED indicator	Yes, shows system and hard disks READ or WRITE status
Hard Disk, Fan and Temperature Fail Alert	Yes, LCD Buzzer and Email notification using ARAIDEye GUI Software for HDD, Fan and Temperature Failure and SNMP Trap function
O.S. Supported	Windows 2000/ NT Server/Workstation, Windows ME/98/XP, DOS 6.22, SCO OpenServer, Free BSD, LINUX, NetWare , Solaris and OS/2
Build-in Powerful Fan	Yes, 80mm. Good for 5400/7200 rpm HD
Space Required	Two free 5.25" drive bays
Bad Sector Reassignment	Yes, capability of detecting and recovering bad sector
Connectors	SATA x1(to host PC), +5V, +12V from power supply

Service

Support

Contact Us

News

Employment